|
|
SpellbinderEntertainment Inner circle West Coast 3519 Posts |
Hello Clever-Builder Types--
I’ve just purchased four “replica” swords for my Sword Basket, they are double-edged broadsword style. My question is: How can I easily and quickly at home (I do not have a shop or tools either, really) further dull the blades so there is no chance of cutting. Thanks for your thoughts, Walt |
ianfarnish New user 36 Posts |
Hi There.
Theres a few things you can do easily and quickly. You could use some emery cloth or sandpaper on a wooden block to dull down the edges.. if you do have a power drill you could attach a sanding wheel. Hope this helps Ian |
kaytracy Inner circle Central California 1793 Posts |
Hi Walt, I actually dull my blades quite a bit, no desire for accidents! As such, I put a full round edge onto them and I first did it using a flat or *** file. The one I used is about 10 inches long, and a bit over an inch wide. It might seem like overkill, but it lets me remove more metal in one pass, and is more comfy on the hand, Oh! be sure to get the wooden handle for it. Realize this will give you a sort of matt finished edge, but that will look different form the shiney bit and actually look like an edge! Be sure to put newspaper down first so you don't get fileings into the rug or woodwork floor!
(yu can alwys pick up a small hand sander with some 80-100 grit paper and go at it too) Kay
Kay and Tory
www.Bizarremagick.com |
The Magic Cafe Forum Index » » The workshop » » Dulling Replica Sword Blades for Basket? (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |