|
|
wizzzzard New user Poland 73 Posts |
I am building fire cage. I would likke to hear some advice from you..
I will put some photos of my prop but first I would like to ask you what is the best way to attached legs to table. I would like to make folding legs (it makes more portable and takes much less space) but I don't know how to do it... Do you have some idea how could it be done ?? Legs are made of metal 5cmx5cm. From one side I attached hinge to make it foldig but I have problem with stabilization of the legs... Any idea ?? Thanks in advanced. PS: sorry for my english |
Michael Baker Eternal Order Near a river in the Midwest 11172 Posts |
I made a fire Blammo that has legs that come off completely. They bolt directly to the sides and each leg has two 45 degree angle braces, one attaching to each adjacent side that corresponds to that corner. The braces are no more than about 12" in length, attaching about 8" down the leg and about the same distance in from the corner where it attaches to the side of the box.
If you need a drawing, I'll make one and email it. ~michael
~michael baker
The Magic Company |
wizzzzard New user Poland 73 Posts |
Thenks for your reply... It would be nice to see it on picture so if you can please send it to me.
kontakt@magicshow.pl |
The Magic Cafe Forum Index » » The workshop » » I am building fire cage.. need some tips... (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |