|
|
CardTrix New user Springfield, IL 52 Posts |
I am wanting to get some flash paper and incorporate it into some of my tricks but have a couple questions...
1) Is it cheap enough to buy and practice with? 2) Do you need anything to ignite it? |
Steve Brooks Founder / Manager Northern California - United States 3780 Posts |
1) Is it cheap enough to buy and practice with?
It depends how much you intend on practicing. Personally, I think that once you get used to the paper and the flash, you will not really need to actually "burn" some everytime you rehearse. 2) Do you need anything to ignite it? Yes you do. Anything "Hot", a lit cigarette, a match, or a electronic device (sold in magic shops) As with all tricks involving fire, I implore you to use extreme caution and common sense. I myself am not afraid of fire, but I have a healthy respect for it. Good luck! _________________ Life is not a problem to be solved... but a mystery to be lived.
"Always be you because nobody else can" - Steve Brooks
|
Magicman0323 Special user Just outside parts unknown. 713 Posts |
I agree with Steve on being very careful when "playing" with fire. To practice I use a small torn strip of paper that is the same size as the flash paper that I'm using. I don't light the regular paper, but go through the steps I would as if it were flashpaper. Good luck with it.
You'll wonder when I'm coming, you'll wonder even more when I'm gone. - Max Malini
|
BroDavid Inner circle America’s North Coast, Ohio 3176 Posts |
The others have already spoken about the practice issue. Once you see how it works, you don't need to fire a new piece each time in practice.
But remember fire is fire, even if it just seems to be here and gone in a moment. Watch the material around you too. Synthetics can go almost as fast as the Flash paper. And something that I have recently begun to do, is that when I do fire (and I do lots of fire!!) I put out a large working Fire Extinguisher, near where I will perform. And I make it very clear why it's there. And here are my two reasons for doing this: <B>Reason Number 1</B> because Fire can burn, and burns aren't pretty. I have seen people burned and I have been burned (although never while performing or even praticing magic) And I want to protect myself as well as everyone around me. <B>Reason Number 2</B> So the audience understands the possible danger of the fire. And although this can be used as a way of elevating the effect in danger in their eyes. The danger is real, and knowing helps keep people from "trying to help" or otherwise being active in anything except an audience role. Flash paper (and fire in general) can be great tools to further a performance, but common sense and appropriate caution should alway be used. The good news is that almost anything, from a match, or lighter, to an electric device can light it. But the bad news is that an errant spark or any number of other things can set it off accidentially. It gets shipped wet for a good reason. Store it wet, until a reasonable time before you are going to use it, and then allow enough to air-dry for your immediate needs, and keep the rest wet. Ok, enough of Safety with Flash Paper 101. Good Luck, and Please be careful out there! BroDavid _________________ If you stand for nothing, you will fall for anything.
If you stand for nothing, you will fall for anything.
|
Michael Peterson Inner circle is where I'm trapped, because of my 4071 Posts |
As for practicing with it, what I do when I absolutely have to have a flash, is to use flash cotton. I bought a package of it 2 years ago and still haven't used it all, This includes using various flash devices.
I love flash paper/cotton Honestly, I just sit around lighting it for no reason |
David Smyth Regular user Stourbridge, UK 146 Posts |
Man, if I did that I'd have no money left!!!
The flash paper that I can get from my nearest Magic store costs, wait for it, a whopping £0.90 for 1 piece of A5 flash paper... WHAT A RIP-OFF!!! _________________ Dave The Magicians Living Room WhatShalliPutOntheSiteToday.co.uk One ring to rule them all and it's mine.
Back at the magic...
|
magic_kris Regular user Louisville, KY 123 Posts |
I have a TT flash igniter with a flint wheel like a lighter and a pot to hold the flash substance.
After not using it for years it no longer sparks. There is a little screw off section containing a spring that I believe is where the flint goes. It contained black powder after sitting for years. Does this sound right? Should I be able to purchase flint at a drug store and place it on top of the spring to make it work again? Thanks --Kris |
Magicman0323 Special user Just outside parts unknown. 713 Posts |
I would say that it SHOULD work, however I'm not going to say to do it or not do it because I don't want the responsibility of having anyone get burned because I gave some bum advice. Good Luck with it!
BTW BroDavid EXCELLENT POST
You'll wonder when I'm coming, you'll wonder even more when I'm gone. - Max Malini
|
magic_kris Regular user Louisville, KY 123 Posts |
Boy, you are really gun-shy or should I say flash-shy.
I sure hope you haven't been sued for helping someone in the past... or something. |
Magicman0323 Special user Just outside parts unknown. 713 Posts |
Kris, just really cautious when it comes to "fire." Just this evening I was called to a house fire with 2 young fatalities, So I guess that sometimes I do go a little overboard on stressing the point.
I've been doing performing with fire for quite a while now, and have been in the fire dept., even longer and I just don't want to see anyone get burned. I'd be more then happy to help you with any fire questions that I could if you would like to E-mail me. However there are some young magicians on this board, and just want to be sure to make a point. Being "fire-shy" just comes with the fire/medical territory! :rolleyes:
You'll wonder when I'm coming, you'll wonder even more when I'm gone. - Max Malini
|
magic_kris Regular user Louisville, KY 123 Posts |
Wow, I understand your concern after what you must deal with day in and day out. I'm not sure I would want to entertain with fire after a day working to fight it. Then again, I guess that your experience makes you the perfect person to do it safely.
However, in this case, I'm sure that anyone who buys the gimmick gets instructions on changing the flint. I just seem to have misplaced mine over the years. Thanks --Kris |
Magicman0323 Special user Just outside parts unknown. 713 Posts |
You might be able to contact the manufacturer and see if they can hook you up with another set of directions.
Now ya understand why I won't recommend anything with fire unless you take the proper precautions. I don't want NO responsibility, I already have to much of that already! That isn't to say I wouldn't help you out in private, just not on the board. _________________ "If it looks good, you’ll see it; If it sounds good, you’ll hear it,If it’s marketed right, you’ll buy it; but...if it’s real, you’ll feel it." - Kid Rock
You'll wonder when I'm coming, you'll wonder even more when I'm gone. - Max Malini
|
Billy Andrew New user Scotland U.K. 55 Posts |
This is really a reply to David earlier.
My local Magic shop is nearly 100 miles from me. By my calculations a single piece of flash paper would cost me £25.90. (I will resist the comments about how much petrol/ gas costs despite the forum name.) Long live the internet!! Billy
A journey of one thousand miles starts with the first step
|
The Magic Cafe Forum Index » » Up in smoke! » » Never used flash paper...got some ?’s (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.03 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |