|
|
drigerbest New user 42 Posts |
I have Haunted 2.0 and the second I put the deck on the floor/ specs hands, it cuts itself. Its way too fast and unnatural.
How do I slow it down? Ive tried literally everything. |
Nikki78 Special user I impaled Dracula with 511 Posts |
Which setup do you use? 1 or 2 card gimmick?
I'm no native speaker - please ignore the mistakes
|
drigerbest New user 42 Posts |
I am using both and still face the same issue.
|
Saturn UK Inner circle 2658 Posts |
The principle to get a delay is to apply pressure to the area of the chip, please ensure you are pressing in the right area.
The harder you push and longer you hold will relate to the amount of delay you get. Start off with the 2 card gimmick and basic insert method shown first to get used to it. I am assuming the chip is in good condition and not dirty or worn in any way, if it is you will need to replace it. Please feel free to PM any questions. It is also important that you do the training process as shown on the dvd, hooking the stuff over the corner for a while as shown. Please refer to the tension and pressure section on the DVD for further information.
www.saturnmagic.co.uk
#theshopwithstock Pleased to be different! FACEBOOK: www.facebook.com/saturnmagic.co.uk |
Nikki78 Special user I impaled Dracula with 511 Posts |
I have to agree with Mark: if you follow all advices
given on the DVD there shouldn't be a problem to cause a delay... I have to admit that it's easier for me having a longer delay with the 1 card gimmick. You should PM Mark. I'm sure he can help you! Cheers Nikki
I'm no native speaker - please ignore the mistakes
|
The Magic Cafe Forum Index » » Tricks & Effects » » Haunted 2.0 TOO FAST? (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |