The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » The workshop » » Appearing wand (0 Likes) Printer Friendly Version

pabloinus
View Profile
Inner circle
1521 Posts

Profile of pabloinus
I have finished building an appearing wand, using regular hardware store materials, I do need to thank Zaubern (Aaron) for his good advise and sharing his past experience with this wand.
Fluorescent cover, (I used a 4ft), regular (cheap) enamel paint and a piece of 1 3/4 plastic pipe, it took me 15 min to prepare everything and then the time for the paint to dry. I tested it 10 times in the last 2 hours and is holding fine.
From 5 feet looks nice, close up look shows paints details. I saw a commercial one and that quality is better, however I am the magician of my family, so this is one is good enough and was a nice challenge.
Later I will try a broom or something like that ...

I am new to the Café, so if this post is incorrect because of the content, please remove it.
The Magic Cafe Forum Index » » The workshop » » Appearing wand (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2019 Steve Brooks. All Rights Reserved.
This page was created in 0.08 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL