The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » The workshop » » Making Shimmed Cards (0 Likes) Printer Friendly Version

Andrew E. Miller
View Profile
Inner circle
Southern California
1428 Posts

Profile of Andrew E. Miller
Could anyone give me some help with making cards with a layer of shim in the center? ala "Deep Astonishment"? Thanks for any help!!!

Andrew
If you get bored go to www.a-miller.idz.net and watch some magic.



-Andrew
WilliamWHolcomb
View Profile
Special user
Twinsburg, Ohio
533 Posts

Profile of WilliamWHolcomb
Andrew,

If you want to make a card that is exactly like the one that comes with DA, you just need some shim material and glue. I was at Yoder's a few weeks ago and Rod said he uses .025" shim stock.

If you want to shim one card, well that's a bit more difficult. The best cards are made with the shim material (.015" is ideal) that matches the card in size. Two cards are split and you sandwich the shim between the front and back layer. You don't use the center layer of either card.

I've made a few of these and they have never turned out at the level of quality from the pros such as Cards By Martin. I just buy mine right now...I've given up! Smile
William Holcomb
Magicduck
View Profile
Elite user
Washington State
484 Posts

Profile of Magicduck
I recall a friend who made them from safety razor blades. He removed the thick edge and used only the thin metal. CAUTION: Obviously, you would need to wear protective gloves and eye protection if attempting this. Once it is glued in the card it would be quite safe.

Also...as an aside, I suppose you could do the same thing with just regular, double edge steel blades. If you were making them smaller, that is where safety is the big issue.

quack
Bobcape
View Profile
Elite user
Rapid City, SD
470 Posts

Profile of Bobcape
Yesterday I talked to Neil at Cards by Martin http://www.cardsbymartin.com
He has a tremendous amount of speciality, handmade cards available, including shimmed cards. I believe that he starts as thin as
.002" and up to .020" shimms. Up to about
.006" thick the card feels like a regular thickness card. The prices were very reasonable. Check out his website.
Bob
Be Amazed! + Enjoy The Magic!
Scott Ocheltree
View Profile
Veteran user
364 Posts

Profile of Scott Ocheltree
Bob-
Thanks for the link to Cards by Martin. I had never heard of him before and found a number of things there that I've been looking for or thinking about. And a bunch of stuff I would never have thought of!
Very Cool!
stephenbanning
View Profile
Regular user
United States
178 Posts

Profile of stephenbanning
Wow. Nice site. Thanks.
The Magic Cafe Forum Index » » The workshop » » Making Shimmed Cards (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2020 Steve Brooks. All Rights Reserved.
This page was created in 0.09 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL