The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » The workshop » » Remote Releasing Hook (0 Likes) Printer Friendly Version

Dustin Baker
View Profile
Inner circle
California
1006 Posts

Profile of Dustin Baker
I'm trying to find something that can release a high-tension rubber band remotely (essentially, a remote controlled sling-shot). The only other requirement is that the remote needs to be wireless.
Think inside the box. . . it's less crowded.
magicjohn2278
View Profile
Special user
Isle of Man UK
538 Posts

Profile of magicjohn2278
Well.... you are not going to find anything "off the shelf" that will do all of the above! You need basically three components, the remote control transmitter and receiver, a solenoid and a mechanism to release the slingshot band.

The transmitter/receiver and solenoid you should be able to obtain by searching the Internet - probably someone here will point you in the right direction (As I live in the UK, I buy this sort of stuff locally so any information that I could give you would be pretty useless!)

In the past, some have suggested butchering various remote controlled toys for the bits required, and this may be the best way to go if you haven't done much electronics type work in the past.

The release mechanism you will have to build yourself and although I know exactly how I would go about it, it would probably take several pages to explain!

The best advice that I can offer is think mousetrap (the spring type)! The problem that you will have is that the solenoid will have quite a small movement, and not be very powerful. Certainly, if you loop the slingshot band around the solenoid plunger, nothing is going to happen when you power the solenoid as the tension of the band will be much too great.

However, if you imagine the band looped around the retaining bar of a mousetrap, then it takes minimal force and movement to spring the trap, releasing the slingshot.

I'm not suggesting that you actually USE a mousetrap, just think levers and construct a mechanism that works on a similar principle!

Best of luck!

PM me if you need further help.
hugmagic
View Profile
Inner circle
7378 Posts

Profile of hugmagic
A music box works well if you can time things out a bit.

Richard
Richard E. Hughes, Hughes Magic Inc., 352 N. Prospect St., Ravenna, OH 44266 (330)296-4023
www.hughesmagic.com
email-hugmagic@raex.com
Write direct as I will be turning off my PM's.
freefallillusion1
View Profile
Elite user
Cincinnati, OH
447 Posts

Profile of freefallillusion1
Dbaker, PM'd you.

Phil
Cliffg37
View Profile
Inner circle
Long Beach, CA
2485 Posts

Profile of Cliffg37
I am thinking that some door bell chimes are still made using solenoids. If you can find an older one with a remote control....
Magic is like Science,
Both are fun if you do it right!
Michael Baker
View Profile
Eternal Order
Near a river in the Midwest
11161 Posts

Profile of Michael Baker
I have used solenoid-driven, under table switch machines when I used to model railroads. There are some nice, strong, heavy-duty ones that would work well. There are also mounting brackets that are configurable (is that a word?), because model layouts are so varied.

~michael
~michael baker
The Magic Company
mkiger
View Profile
Loyal user
228 Posts

Profile of mkiger
http://science.howstuffworks.com/crossbow.htm

This is a link to a picture of a crosbow trigger. Something like this can overcome the load on a small solenoid.
Servante
View Profile
Inner circle
1328 Posts

Profile of Servante
I haven't needed a solenoid set up for years, but a long time ago I'd go to the parts warehouse for one of the appliance stores. If I didn't know exactly which solenoid I needed, I'd draw a picture for the guys behind the counter (without tipping any secrets).
They'd get excited about helping out and start drawing pictures among themselves until they'd come up with the exact piece needed.
Lou Hilario
View Profile
Inner circle
2222 Posts

Profile of Lou Hilario
Buy a remote control car alarm system, car power lock and a small 12v rechargeable battery.
Magic, Illusions, Juggling, Puppet & Parrot Show ^0^
http://www.louhilario.net
kaytracy
View Profile
Inner circle
Central California
1793 Posts

Profile of kaytracy
Have you ever seen a rubber band gun made with a clothespin? The pressure needed to release the clothespin will be easier to get off of a small solenoid than trying to get the rubber band to slip off the pin. One could also use the RC car wheel to pull the pin so to speak, winding a thread will also apply a pull force (drill a hole in one side of the clothespin) to make a release.
k
Kay and Tory
www.Bizarremagick.com
Dustin Baker
View Profile
Inner circle
California
1006 Posts

Profile of Dustin Baker
Thanks for the ideas everyone.

I'm trying a few different things with RC car motors, mouse traps, a suspended slingshot, and a little toy crossbow that launches foam airplanes.

If I can find a cheap one I'll give the auto lock door concept a try as well.
Think inside the box. . . it's less crowded.
rhiro
View Profile
Regular user
Southern California
165 Posts

Profile of rhiro
How about an RC servo hooked up to a release mechanism? Here are a couple:

http://www2.towerhobbies.com/cgi-bin/wti......&P=7

http://www.icare-rc.com/tow_hooks.htm#Remote_tow_hook

I once had a cool plastic tow hook springloaded mechanism on an RC glider but I forget who makes it. It locks shut, capturing the tow hook, and a single servo connected to it will trip it via a pushrod or pull cable.

Of course, you could always roll your own, a la something like this:

http://www.ef-uk.net/data/tow-release.htm


Ross Hironaka
The Magic Cafe Forum Index » » The workshop » » Remote Releasing Hook (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2020 Steve Brooks. All Rights Reserved.
This page was created in 0.1 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL