|
|
Carl Andrews Special user Maui, Hawaii 749 Posts |
Is it possible to have some kind of timer added to an electronic switch so that I can have the device run for say 30 seconds and shut off by itself?
|
Cliffg37 Inner circle Long Beach, CA 2491 Posts |
KayTracy posted plans like that about a year ago. I don't remember the topic, but try a search on that name.
Magic is like Science,
Both are fun if you do it right! |
magicjohn2278 Special user Isle of Man UK 544 Posts |
The kit below will do more or less exactly what you need - it says it runs off 12 volts, but at a push it will run off a 9 volt PP3.
I've used a few of these over the years, although in ALL my projects I have had to alter the circuit to swith something ON after a predetermined delay - possible but not at all easy! http://www.vellemanusa.com/us/enu/product/view/?id=350494 |
Carl Andrews Special user Maui, Hawaii 749 Posts |
Thanks for the suggestions!
|
Anverdi-museum Inner circle 1194 Posts |
If you are looking to run something for just a brief time ( 10 - 60 secs. ) then shut off or start an electronic item with the same delay length, a cool timer/switch is the model 90 pneumatic timer by Eagle Signal. This is really an air tank type unit with an adjustable thumbwheel for setting the time length to either start or stop anything wired in series. When the air basically runs out in the 'tank', the two metal leads touch and complete the circuit. This is a nice, reliable way to go. If you need further assistance - pm me.
Chuck |
The Magic Cafe Forum Index » » The workshop » » Timer (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.01 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |