|
|
chrismorrow New user 6 Posts |
I am working on a project that requires me placing a hinge on thin 1/8" ply. My concern is that the wood is too thin for screws. So, can I glue the hinges in place? If so, what glue would be best? Or, would I be better served using another method of hinging the wood such as fabric? Any thoughts would be appreciated.
|
mvmagic Inner circle Has written 1322 Posts |
Sure you can glue the hinge, just make sure you don't get glue inside the hinge so it will operate! I would use some super-strong epoxy.
Fabric works as well, you just need a fabric with good tear strenght to make sure it lasts. I have used pieces of truck tarp (kinda rubbery material with fibers or something in it) which I glued and stapled in place. Pop rivets might also work. Cant really say for sure as I have never worked with them much.
Sent from my Typewriter
|
chrismorrow New user 6 Posts |
Thanks for the info mvmagic. I'll look at some epoxy. The question of fabric lasting over time is a concern.
|
ClintonMagus Inner circle Southwestern Southeast 3997 Posts |
Can you PM me and tell me exactly wht you are planning to do with it? I have an idea, but it depends on the use.
Things are more like they are today than they've ever been before...
|
kregg Inner circle 1950 Posts |
Chris,
What's the piece you're building? Kregg
POOF!
|
Eldon Inner circle Virden, IL 1137 Posts |
Epoxy glue then pop rivets. Make sure you use backer washers.
|
rhiro Regular user Southern California 182 Posts |
How strong must it be? If the loads are low, would model airplane hinges work? What kind of hinge travel are you looking for? Does one or both sides of the panel need to remain flush (e.g. no protuding fasteners)? Is friction an issue?
There are lots of ways to go depending on your application. What are you building? Ross Hironaka |
chrismorrow New user 6 Posts |
Thanks again for all the suggestions. Without getting too specific Kregg, I'm building a block similar in concept to that which is used in a block box. With that in mind, I'm looking to use a hinge method that can be easily concealed with BA, yet strong enough to last a long time. I was originally thinking about tiny jewelry box hinges, but was unsure about how best to attach them. I fear rivots would be visable, and fabric might tear over time. So it sounds like epoxy might be the way to go. I hope this helps.
|
Thomas Wayne Inner circle Alaska 1977 Posts |
Some jewelry box hinges are designed for thin wood, and have small prongs that penetrate the wood. In some cases they come through the other side and are then crimped flat, forming a strong and reliable method of attaching metal hinges to thin wood or cardboard. Some stand-up photo frames have a cardboard insert that uses this method for the hinged easel leg.
See: http://www.craft-inc.com/c/cnt/down/Hing......lied.pdf TW
MOST magicians: "Here's a quarter, it's gone, you're an idiot, it's back, you're a jerk, show's over." Jerry Seinfeld
|
Autumn Morning Star Grammar Hostess Today, I corrected grammar in 1378 Posts |
Go to the hardware store and ask for a (um...this is a real item, ok...) a quarter inch "Chicago Sex Screw". (Geez...I bet the Café automatic profanity program censors me.) This is a two part flathead screw coupling (one side female - one side male) which threads into itself. It has a flange on both sides and these come in varying lengths and sizes.
Your hinge is probably about 1/8" thick and your ply should take up the rest of the room. You can shim it if it has play. You might have to use a countersink bit on the hinge to make the screw lay flush. I use them on my 1/4" ply magic tables and they work great. You will not believe the applications they have in building magic! All you need is a drill, a flathead screwdriver, and a straight face when you request them. http://www.midwayusa.com/eproductpage.ex......aign=655 or http://store.ryansproducts.com/10chscbr.html
Wonder is very necessary in life. When we're little kids, we're filled with wonder for the world - it's fascinating and miraculous. A lot of people lose that. They become cynical and jaded, especially in modern day society. Magic renews that wonder.
Doug Henning |
cupsandballsmagic Inner circle 2705 Posts |
Autumn,
Just a quick thank you... I know it's an old thread but I am making a Rolon Table (my first woodworking project) and I just came here to search for a method of mounting the hinges to 1/4 ply and found your reply to this topic.... Thanks! Bri |
illusionman2 Special user 991 Posts |
I use Liquid Nails Clear small projects and repairs --to glue on all the hinges on my 1/4" plywood Zig Zag--I put glue on the hing screwed it down--in a week (after it drys) I take out the screws and sand --never had one come off.
|
cupsandballsmagic Inner circle 2705 Posts |
Thanks illusionman2. I just visited my local DIY shop and bought some of the same stuff... on a roll! The blurb on the back say's a strip (just over 1/2" wide and as thick as double sided tape) will hold 50lbs.
This is for another project but I thought it may be of intrest. Bri |
illusionman2 Special user 991 Posts |
Quote:
On 2008-09-16 14:32, mindyourmagic wrote: Do be careful, the down side is once the hinge is on you can't get it off. |
cupsandballsmagic Inner circle 2705 Posts |
Good point (and noted!)
Thanks illusionman2! |
Regan Inner circle U.S.A. 5726 Posts |
Fabric is hard to beat for invisiblity!
Mister Mystery
|
The Magic Cafe Forum Index » » The workshop » » Best method to hinge 1/8" ply (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.02 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |