|
|
Lloydster New user California's Central Coast 2 Posts |
I used to get my special cards from Neil Lester (http://www.cardsbymartin.com). Unfortunately, Neil passed away last year and there are a couple of gaffed cards / packet routines he made that were unique. In particular, his English 3 Card Monte in poker and jumbo. Is there anyone out there that can make some customs for me?
|
Vlad_77 Inner circle The Netherlands 5829 Posts |
Why not roll your own?
http://www.lybrary.com/card_designer/ This is an EXCELLENT tool. I am a graphic artist but I have to admit that Chris has done a bang up job here. I plan to use it for other purposes than "regular" cards, but, with the template, I can load in my original art work and create some really wild stuff. I am hoping over Christmas to make a few sets of Dingle's "Poor Charlie" for my own use. Give it a shot Lloydster. You design the card(s), save it/them, order some of the card stock from Chris at Lybrary.com and off to the printer you go! Namaste, Vlad |
Lloydster New user California's Central Coast 2 Posts |
Thanks, Vlad
What Neil would do for the English 3 card monte is delaminate or separate the gaff card and attach part of another card using very thin elastic strip. Unfortunately, I haven't fiqured out how to do this without trashing the card. |
Chappo Special user Bris Vegas 754 Posts |
The rules of a sleight of hand artist, Are three, and all others are vain,
The 1st & the 2nd are practice... And the 3rd one is practice again - 'Magic of the Hands', Edward Victor (1940) |
shaunluttin Special user 759 Posts |
I am also wanting to build the Poor Charlie cards or to have someone else do it for me. Though I am not particular about what is on the backs, I would like them to be high quality poker sized e.g. like Bicycle cards. My budget is around $20 for the set. Is this doable?
E.g. http://www.lybrary.com/card_designer/export/faces73914.jpg and http://www.lybrary.com/card_designer/export/backs70599.jpg Here is a 29-minute live performance of mine: https://youtu.be/lq2Rj1uf05M I used to be quite sensitive to criticism; I am much less so now; so, please do criticize my technique, presentation, and posts. It helps me to grow, and I promise to take responsibility and not to be defensive. |
Rainboguy Inner circle 1915 Posts |
Lloydster:
I, too had the late Neil Lester make MANY custom gaffs for me, and they were and are remarkable in the quality of their workmanship. At last year's Abbott's Close-Up convention, I asked Max Maven who I should contact for custom-made gaffed cards and he told me Gary Plants was THE MAN. That's good enough for me. |
Tom G Inner circle 2896 Posts |
Http://thecardplant.com/ Gary's site.
|
markcall New user 28 Posts |
Until I saw this post I never thought of making my OWN gaffed cards.. THANKS Vlad_77 for the GREAT IDEA!
|
Robert M Inner circle 2482 Posts |
I bought cards from Neil for many years, as well.
Gary Plant does exceptional work. And, so does Martini: http://www.martinismagic.com/Products.html Robert |
CardMaker Inner circle Ludwigsburg/GERMANY 1063 Posts |
... still in businesss since the year 2000:
https://plus.google.com/+CardMakerBerndMauckschGermany/about
CardMaker/Bernd Maucksch
Finest gaffed cards for magicians |
esmerdon New user Knoxville, TN 54 Posts |
Vlad how do you cut your cards after you've printed them on the card stock? I saw Chris sells a card cutter...but I don't want to pay the $250 it costs.
|
Poof-Daddy Inner circle Considering Stopping At Exactly 5313 Posts |
Quote:
On Oct 3, 2015, esmerdon wrote: You would have to very carefully use a guillotine type cutter and a corner rounder but you will still suffer from inferior cuts. Anyone who does a lot of gaffing, the cost is not that much. If you only want a few gaffs, it is better and cheaper to custom order from a pro.
Cancer Sux - It is time to find a Cure
Don't spend so much time trying not to die that you forget how to live - H's wife to H on CSI Miami (paraphrased). |
esmerdon New user Knoxville, TN 54 Posts |
I was afraid of that poof :- Guess I'll just order from a pro for now. Maybe later in life I can consider doing that.
|
Poof-Daddy Inner circle Considering Stopping At Exactly 5313 Posts |
Don't feel bad, I am in the same boat. I do however have the corner rounder from Lybrary.com and a home brew card cutter that James P. Riser posted a couple years ago (how to make) I also dabble in splitting and either gluing or DMT. But all this is just for very basic gaffs. Eventually I will find someone (or a few someones) who use Phoenix Brand cards that want to go in and have the gaff that will work for NFW or Ace custom printed. The price to get 400 is not bad and I think the extras could be re-sold to cover most of the cost. Being on disability has killed my "magic money" but I have a stash started for this and one other project in Phoenix Brand.
Fortunately, the card cutter is still up http://jamesriser.com/Magic/CardTrimmers......ser.html made mine for less than $17 a couple years ago. (made that back "in value" in a week) It is fantastic for making your own short cards, Mental Photography, svenguli's, strippers, end strippers... (with the added corner rounder) they are perfect. Again, Thank you Mr Riser
Cancer Sux - It is time to find a Cure
Don't spend so much time trying not to die that you forget how to live - H's wife to H on CSI Miami (paraphrased). |
esmerdon New user Knoxville, TN 54 Posts |
I might have to make me one of those! Thanks for posting.
|
videoman Inner circle 6750 Posts |
Quote:
On Oct 3, 2015, Poof-Daddy wrote: I've had Shawn Evans at http://www.mimesis-magic.com/index.html make several gaffs with Phoenix backs for me. They turned out great and only cost a few bucks. I have always supplied him with the cards I wanted whenever I required cards other than Bicycle or Tally Ho. Some of them involved using "jokers" and I just prefer the standard Bicycle joker to the Phoenix joker. |
esmerdon New user Knoxville, TN 54 Posts |
Videoman, I just checked out his website. He's got some good stuff I think I'll order a few things.
|
The Magic Cafe Forum Index » » Gaffed & Funky » » Custom gaffed cards (0 Likes) |
[ Top of Page ] |
All content & postings Copyright © 2001-2024 Steve Brooks. All Rights Reserved. This page was created in 0.04 seconds requiring 5 database queries. |
The views and comments expressed on The Magic Café are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic. > Privacy Statement < |