The Magic Caf
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » The workers » » Printing on card (0 Likes) Printer Friendly Version

mightychan
View Profile
New user
Hong Kong
12 Posts

Profile of mightychan
Do any one try to print something on the card?
Any solution?
Thanks
Mighty Chan
-------------------------------------------
Magic for Future
http://www.magicforfuture.com
mighty@magicforfuture.com
Your online magic shop
TomasB
View Profile
Inner circle
Sweden
1144 Posts

Profile of TomasB
On blank faced Bicycle cards I've used nail polish remover, then printed on it with an Ink Jet printer. To prevent it from smearing, I sprayed with some cellulosa based fixative.

/Tomas
RiffClown
View Profile
Inner circle
Yorktown, Virginia (Previously Germany)
1579 Posts

Profile of RiffClown
This has been discussed here.

My results using the method discussed there were about the same as my other attempts. Good results were achieved using a similar method to what Tomas described. I've also had good results using a laser printer. (you still have to remove the finish.)
Rob "Riff, the Magical Clown" Eubank aka RiffClown
<BR>http://www.riffclown.com
<BR>Magic is not the method, but the presentation.
The Magic Cafe Forum Index » » The workers » » Printing on card (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2022 Steve Brooks. All Rights Reserved.
This page was created in 0.01 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL