The Magic Café
Username:
Password:
[ Lost Password ]
  [ Forgot Username ]
The Magic Cafe Forum Index » » The workshop » » PVC Advice (0 Likes) Printer Friendly Version

Cliffg37
View Profile
Inner circle
Long Beach, CA
2492 Posts

Profile of Cliffg37
Any thoughts on how to paint a length of PVC to make it look like it is a heavy metal pipe?
Magic is like Science,
Both are fun if you do it right!
Bill Hegbli
View Profile
Eternal Order
Fort Wayne, Indiana
22891 Posts

Profile of Bill Hegbli
You could try gray paint. Most thick steel metal pipe is gray looking with threaded ends. Got to a Home improvement center and take a look at the pipes. I was just at Lowes and they also sell black steel pipe. A customer was exiting the store as I was entering, with the pipe in hand, so I took a look at the pipe section and there they were along with gray pipes.
imgic
View Profile
Inner circle
Moved to Seattle to see
1217 Posts

Profile of imgic
Rustoleum makes metallic 'hammered' spray paint in various colors. I used black on some PVC pipe to make it look like cast iron.

Rough up the PVC a bit first, do a few coats per instructions, and Bob's your uncle.

https://www.rustoleum.com/en/product-cat......ay-paint
"Imagination is more important than knowledge."
countrymaven
View Profile
Inner circle
1362 Posts

Profile of countrymaven
? sand it lightly then rubber cement some aluminum foil to it
Dan Ford
View Profile
Special user
Illinois
533 Posts

Profile of Dan Ford
? sand it lightly then rubber cement some aluminum foil to it

Use the dull side of the foil.
mvmagic
View Profile
Inner circle
Has written
1307 Posts

Profile of mvmagic
There are several good options out there, the important question is how much handling it needs to take as some finishes (such as Alclad lacquers or graphite powder) give amazing finish but don't take a beating (and clear-coating is a tricky business with them). Good option would be to use semi-gloss paint on it, and then dry-brush metallic paint on it. Likely you need "heightened reality" here; a plain steel pipe from a distance may not read as metal very well. Of course, the way you handle it adds to the effect. Here's a few videos on the subject:

https://www.youtube.com/watch?v=TiyDzoFtFJk

https://www.youtube.com/watch?v=VI9MoKl8E-k

https://www.youtube.com/watch?v=tqltCcJHyiI

https://www.youtube.com/watch?v=UEDZJt4s7es

https://www.youtube.com/watch?v=M2w3HcTOB-g
Sent from my Typewriter
makeupguy
View Profile
Inner circle
1406 Posts

Profile of makeupguy
I have a way to paint PVC... so that the paint becomes a part of the PVC, but it's toxic as heck. I won't tip it here as it's the method I used to paint my BarbWire trick... and I don't want anyone trying to use it with just a window open... this needs to really be done in a spray booth. Direct Message me
Michael Baker
View Profile
Eternal Order
Near a river in the Midwest
11161 Posts

Profile of Michael Baker
Rustoleum has a specialty paint for plastic, including PVC.
Find a good base coat, then add a secondary color to give it some depth. Finally, a touch here and there with a red primer will simulate rust oxidation, giving it a more realistic appearance.


https://www.rustoleum.com/~/media/Digita......TDS.ashx
~michael baker
The Magic Company
The Magic Cafe Forum Index » » The workshop » » PVC Advice (0 Likes)
[ Top of Page ]
All content & postings Copyright © 2001-2021 Steve Brooks. All Rights Reserved.
This page was created in 0.1 seconds requiring 5 database queries.
The views and comments expressed on The Magic Café
are not necessarily those of The Magic Café, Steve Brooks, or Steve Brooks Magic.
> Privacy Statement <

ROTFL Billions and billions served! ROTFL